Atacama SLX200 – Speaker Stands – 245 mm – Large Top Plates – Black

The SLX series is Atacama’s most professional line of speaker stands, ideal when a larger top plate is required.
The SLX series features a four-column design and provides a stable platform for larger bookshelf speakers and other technical equipment. Atacama’s insulating gel pads and modern cable management are also included in these stylish speaker stands.
These high-quality speaker stands from Atacama were specially designed and constructed for discerning audiophiles.
The stands are extremely stable and minimize the transmission of case vibrations.
With a height of 30-70 centimeters (without isolation gel pads and floor spikes), the SLX series ensures optimal placement of the speakers.
The speaker stands are made of thick steel with highly stable fixings to ensure optimal rigidity.
Each SLX tripod pair consists of new 5 mm thick laser-cut carbon steel base plates, eight adjustable BZP 8 mm ground spikes with stainless steel top caps and improved High-Load Trapezoidal (HLT) isolation gel pads for the head plates.
For improved performance, the SLX series always comes with insulating gel pads as standard equipment.
These pads protect the bottom of the speaker, reduce the risk of slipping, create a damping barrier on the speaker, and thus improve sound quality.
Ground spikes are also included as standard.
To protect sensitive floor coverings, special Atacama washers are also available from us if required.
The top plate is made of a thick steel plate. All SLX speaker stands have identical standard top plates measuring 225 mm wide and 225 mm deep, and identical standard bottom plates measuring 305 mm wide and 305 mm deep. Please note: The width/depth dimensions of the supported speakers should not exceed the dimensions of the speaker stand.
The stands are finished in satin black.
SLX series speaker stands are designed and manufactured in the UK.
Atacama SLX speaker stands are available in the following sizes: SLX200 = 245 mm (9.25″); SLX300 = 345 mm (13.6″); SLX400 = 445 mm (17.5″); SLX500 = 545 mm (21.5″); SLX600 = 645 mm (25.4″); SLX700 = 745 mm (27.5″)

Note
Atacama recommends Atabite SMD-Z 7HD inert filler for maximum acoustic performance.
Atacama recommends filling each pair of SLX stands two-thirds full with Atabite SMD-Z 7HD filler to maximize their sonic potential.
Atabit Quantity Recommendation:
The following is the recommended number of buckets to share between each speaker stand. All vertical columns should be filled equally. The quantities are approximate and do not necessarily fill the tubes completely. It is recommended that you experiment with the exact amount to achieve the best sonic results for your specific system, as the speakers, room acoustics, wiring harness, speaker placement, and hi-fi components all determine how much Atabite filler is used to get the best sound from your speakers.
Generally, filling the tubes to about half to two-thirds full yields the best results. If you find that your speakers lack high-end detail and sound muffled at the low end, this usually means you’ve overfilled the stands and need to reduce the amount of atabites in each stand.
If the speakers are new, it’s recommended that the exact amount of atabites required is best determined after they’ve been broken in. Refer to your speaker’s manual or contact the distributor/manufacturer for recommendations.
SLX200 = 1 bucket; SLX300 = 2 buckets; SLX400 = 3 buckets; SLX500 = 4 buckets; SLX600 = 5 buckets; SLX700 = 6 buckets