Atacama Atabites SMD-Z 7HD – Filling material for Hi-Fi furniture and speaker stands

To get the best possible sound from your speaker stand, it is recommended that the main columns be filled with a high-density inert filler.
This calms the platform and is perfect for positioning bookshelf speakers on it, for example.
By adjusting the amount of filler used, you can experiment to find the optimal amount of filler that suits your speakers.
Atabites has an approximate density of 2403 KG/m² compared to dry sand which has a typical rating of only 1442 KG/m².
The Atabites SMD-Z 7HD filler with new zinc-coated microdisks has a uniform particle size with consistent sound performance.
The zinc coating adds mass, protects the filler from oxidation and degradation, while improving visual aesthetics.
Please note: Atabites are shipped by weight, not volume (7 kg bucket). Some settling of contents may occur during transport.
185 / 5.000
Übersetzungsergebnisse
Übersetzung
Here is the maximum approximate weight of the Atabites that can be used for each pair of speakers: Nexus 5i = 7 kg; Nexus 6i = 8.2 kg; Nexus 7i = 12.2 kg; Nexus 10i = 21 kg.
Moseco 5 = 7kg; Moseco 6 = 10.4 kg; Moseco 7 = 12.2 kg; Moseco 10 = 21kg.
Moseco XL500 = 35kg; Moseco XL600 = 42kg
SLX200 = 7kg; SLX300 = 14kg; SLX400 = 21kg; SLX500 = 28kg; SLX600 = 35kg; SLX700 = 42kg; SLX1000 = 49kg.
The sound results depend on the positioning of the speaker, the type of speaker, the room size, the type of electronics and cabling, the listening position and personal taste.
However, the best results are usually achieved when the stands are filled about half to two-thirds full.